It’s a human nature to lose things and car alarm remote is no exception. You can buy the replacement at any electronic store or automobile store with no expensive price. But when it comes to programming the remote and the alarm it maybe cause some costs. You can save your money by programming your own replacement car alarm remote.
There are a few things to replace car remote alarm. First step, you have to close doors and trunk and place the key in the ignition. Turn your key two clicks to the right. That will be one click short of start position.
The next step is press the override button on the alarm remote and releases it five times in less than eight seconds. Then, you have to press the lock button on the alarm remote to finish the programming.
For programming another remote to the car alarm system, you can follow the steps above. Try to test the remote by pressing any button after you have finished and remove the key from the ignition.
What if you don’t know the type and the brands of your car alarm and you don’t mechanically savvy enough to figure it out? Don’t get in rush to replace alarm system, call the dealer first. The dealer will be able to find out the brand and the type of your car alarm. Now you can go to electronics store or auto parts store to buy the replacement.
If you got a problem to switch off the alarm while you lost your remote and have to drive you car, you can try this way. Open the hood and check the battery for the wire that leads to the alarm. There should be a fuse along that line. You have to remove the fuse to disable the alarm.
2 comments:
Amazing blog and very interesting stuff you got here! I definitely learned a lot from reading through some of your earlier posts as well and decided to drop a comment on this one!
Your blog contains very important information which helped me much. Thank you for sharing this information.
Post a Comment